Adapters: IDE, SATA, ZIF, SCSI

The MultiDrive Adapter allows 2.5 inch, 1.8 inch pin connector and 1.8 inch ZIF connector IDE hard drives to be connected to a write blocker or standard 40 pin IDE connector.

The MicroSATA Adapter can be used to adapt a SATA interface to a Micro SATA drive. It is voltage regulated to generate +3.3V required for a MicroSATA drive.

The adapter was not designed for internal laptop use (it will not fit inside a laptop). It is intended to adapt a MicroSATA interface to an external SATA write blocker.

7-conductor SATA (Serial ATA 150) signal cable. 8" length

Serial ATA 150 to IDE Convertor

1.8" IDE HDD Adapter (for iPod and Toshiba 1.8" drives) to connect to 3.5" IDE connector

Tableau 2.5" IDE Adapter to connect to 3.5" IDE connector

The Tableau TDA5-ZIF Forensic IDE Drive Adapter is designed to enable ZIF drive imaging using Tableau’s T14 IDE and T35e SATA/IDE Forensic bridges.  It can also be used to connect a ZIF drive directly to the IDE channel on a PC motherboard using a standard 3.5" IDE channel cable.

The TDA5-ZIF ships as a drive adapter kit and includes one TDA5-ZIF IDE drive adapter, two TC20-3-2 Toshiba (or Samsung) ZIF drive cables, two TC20-3-3 Hitachi ZIF drive cables, and one zippered nylon kit bag.

The v4 1.8 inch Hitachi ZIF drive Combo Adapter enables connection of a Hitachi 1.8" ZIF drive to a 3.5" IDE adapter.

Designed primarily to work with the Combo Dock v4 and the Forensic ComboDock v4 but will also work with the Tableau Forensic Bridges and other IDE adapters.

Fourth Generation adds new features to quickly connect 3.5" drives through FireWire 800/400/USB

ComboDock v4 is a perfect solution for anyone who wants highest speed FireWire transfer rates and access to bare 3.5" IDE drives. It quickly attaches drives via FireWire 800 (400 compatible) or USB. Dual FireWire 800 ports allow daisy-chaining for more versatility.